LIMAXBLUE AdBlue® / AUS 32

Home / Products / AdBlue

FOR SCR-EQUIPPED DIESEL VEHICLES

LIMAXBLUE
AdBlue®.

Power your business. Choose the packaging and quantity you need, then enquire about your supply requirements.

Factory-direct wholesale supply · Contract / private-label manufacturing enquiries

For the separate AdBlue / AUS 32 tank. Never add to the fuel tank.

LIMAXBLUE AdBlue 1000 L IBCLIMAXBLUE AdBlue 200 LLIMAXBLUE AdBlue 10 L
PACKAGING FOR YOUR SCALE

FROM 5 L TO IBC

Supply at the scale you need.

Looking for bulk supply?

Let us discuss volume and dispensing requirements. Bulk supply has no fixed pack code.

PRODUCT AND USAGE

The right tank.
The right use.

AdBlue is used in exhaust-gas treatment in SCR-equipped diesel vehicles. Follow the vehicle manufacturer’s instructions.

  • Fill only the dedicated AdBlue / AUS 32 tank.
  • Do not dilute or mix with fuel, oil or other liquids.
  • Use clean, dedicated dispensing equipment.
SCRSystem application
32.5%Nominal urea content · TDS
ISO 22241Reference standard · TDS

Explore dispensing details.

Hardware is considered separately from the product pack. Compatibility and included equipment are confirmed with your quotation.

DIRECT ACCESS TO DOCUMENTS

The product and
its documents.

Technical product information and safe use

Product purpose

Designed for a separate SCR fluid tank

LIMAXBLUE AdBlue® / AUS 32 is injected into the exhaust stream by the vehicle's SCR system. It is not diesel fuel and it is not a fuel additive.

How it is used

Fill only the vehicle's dedicated AUS 32 tank, following the vehicle manufacturer's instructions. Use clean, dedicated dispensing equipment to protect product purity.

What must be avoided

Do not add to the diesel tank. Do not dilute, mix with other liquids, or transfer using contaminated pumps, nozzles or containers.

Technical data

Core product characteristics

The values below are specific to the current LIMAXBLUE AUS 32 English Technical Data Sheet, version 2.0 dated 12 August 2026.

Urea concentration32.5% nominalHigh-purity urea in demineralised water
Reference standardISO 22241Aqueous urea solution for SCR systems
AppearanceClear, colourless liquidProduct-specific visual characteristic
pH9.0–9.5Current TDS value
Density at 20°C1.087–1.093 g/cm³Current TDS range
Freezing pointApproximately −11°CMay be thawed gently if purity is maintained
Composition: 32.5% urea and 67.5% demineralised water. For full handling, first-aid, transport and regulatory information, use the current Safety Data Sheets in the document section below.

Supply formats

Verified packaging and SKU matrix

Packaged formats use the documented SKU rule. Bulk supply is volume-variable and therefore does not carry a fixed pack SKU.

FormatContainerSKU / product codeSupply note
5 LCanLMX0161Packaged product
10 LCanLMX0135Packaged product
20 LCanLMX0162Packaged product
30 LCanLMX0212Packaged product
200 LDrumLMX0163Packaged product
1000 LIBCLMX0137Packaged product
BulkVolume-variableNot assignedNo fixed pack SKU

Handling and storage

Protect purity from filling to storage

Use a dedicated tank

Fill only the separately marked AUS 32 tank on SCR-equipped vehicles.

Keep equipment clean

Use clean, dedicated pumps, nozzles and containers; prevent dust, fuel, oil and water contamination.

Store at 10–30°C

Keep the container closed and protect it from direct sunlight and excessive heat, in line with the current SDS.

Manage freezing correctly

If frozen, allow the product to thaw gently without local overheating. It may be reused when it remains uncontaminated.

Approved documents

Technical and safety documentation

Use the documents below for the complete product-specific technical, safety, handling and regulatory information. Each link opens the approved PDF in a new tab.

VDA QMC AdBlue® licence

The 2026 licence document names Lima Dış Ticaret ve Teknoloji Anonim Şirketi as licensee (certificate 0005601; issued 22 September 2026; stated validity through 21 September 2029, subject to its terms). This licence is separate from the product-specific TDS and safety sheets above. View the VDA QMC licence (PDF).

Frequently asked questions

Using LIMAXBLUE AdBlue® / AUS 32

What is LIMAXBLUE AdBlue® / AUS 32?

It is an aqueous solution containing nominally 32.5% high-purity urea and 67.5% demineralised water, intended for SCR systems in diesel vehicles.

Is it a diesel fuel additive?

No. It must never be added to the diesel tank. It belongs only in the vehicle's separate AUS 32 tank.

Which vehicles use it?

It is intended for diesel vehicles equipped with a Selective Catalytic Reduction (SCR) system. Follow the vehicle manufacturer's instructions.

Can LIMAXBLUE AdBlue® / AUS 32 be diluted or mixed?

No. Do not dilute it or mix it with water, fuel, oil or any other liquid. Product purity is essential for SCR system operation.

How should it be stored?

Keep the container closed, use compatible clean equipment, protect from contamination, direct sunlight and excessive heat, and store at 10–30°C in line with the current SDS.

What happens if the product freezes?

The solution freezes at approximately −11°C. It may be allowed to thaw gently and reused when no contamination or local overheating has occurred.

Which pack sizes are available?

Verified formats are 5 L, 10 L, 20 L and 30 L cans, 200 L drums, 1000 L IBCs and volume-variable bulk supply.

Technical product values on this page are limited to the current product-specific TDS. Safety guidance is summarised from the current English SDS and approved Turkish GBF; the PDFs remain the complete controlled documents.

More about LIMAXBLUE AdBlue®

LIMAXBLUE AdBlue®
The right chemistry keeps you moving.

From the first delivery of the day to the last kilometre of a long journey, every vehicle depends on interconnected systems. Using the correct operating fluid is part of keeping those systems working as intended.

We consider supply enquiries from dealers, distributors, workshops, fleets and corporate buyers according to product, packaging and quantity requirements.

When choosing AdBlue, consider its source, technical characteristics and storage conditions together. We aim to support product selection with clear information and packaging and supply options suited to your needs.

Supply suited to your needs

Whether you need a convenient filling option for your vehicle or regular supply for your business, we can help identify an option that fits your consumption and operating conditions.

Start with the correct product. Give every detail of preparing for the road the attention it deserves.

AdBlue must not be added to the fuel tank. It is used in the vehicle’s separate AdBlue tank. Follow the vehicle manufacturer’s instructions for use and filling.

PRODUCT · PACKAGING · QUANTITY

Choose what you need.
Let’s plan your supply.

Review your packaging and quantity in the next step.

QUOTE REQUEST

Your enquiry selection

Review your selection. Your enquiry is sent only when you complete and submit the existing form.

Existing contact form ↗

This website accepts quotation enquiries. Online payments are not available. Production, delivery, freight and payment terms are confirmed in the quotation.

Product and quotation request

Tell us the format and quantity you need

Use the form below for LIMAXBLUE AdBlue® / AUS 32 product information, packaging availability or a commercial quotation. Submitting the form is your choice; no message is sent unless you complete and submit it.

For importers and distributors, request an EXW quotation from our Kıraç/Esenyurt facility. State your product, packaging and quantity. Factory collection; transport excluded. An address is needed only for transport costing.

LIMA DIS TICARET VE TEKNOLOJI A.S.

Mecidiyekoy Yolu Cad. Karsuyu Sk. No:2
Trump Towers Tower 1 Residence, Floor 4, Apt. 401
Sisli / Istanbul, Turkiye

+90 850 255 0 562
+90 212 706 0 562
info@limagroup.com.tr

limaxcar_beyaz

Contact us about LimaxCar products and commercial enquiries.

Our Brands

© 2022 Lima Group. All Rights Reserved

DMCA.com Protection Status